Our new A5 sheet offers a larger illuminated field measuring 8 X 5.75 inches. Exterior (edge to edge) dimensions are 8.875 X 6.125 inches. This sheet is creamy white when off and glows with a phosphorescent blue-green color when on. It is designed to cut into any size or shape as long as two side tabs are left intact for power connections. The two tabs do not have to be adjacent, but must be of different colors.
A full sized sheet should be powered by an iA5 inverter, but with good connections and fresh batteries an iTY6.0 can provide adequate illumination. For a finished shape that is smaller (up to about 30 square inches), an iTY6.0 inverter is suitable.
Best used with an inverter (or cable) with gator clips for easy connections to the tabs for experimenting with different configurations. Permanent connections can be made with glue, copper foil tape or solder (be sure to drip the solder onto the tab; don�t let the iron touch the sheet). If the wire connections will be under stress, punch a small hole in a tab, thread the wire through, crimp it back on itself for good contact, and then use solder or glue to secure it.