Our new A4 sheet offers a larger illuminated field measuring 8 X 11.5 inches (20.3 X 29.2 cm). Exterior (edge to edge) dimensions are 8.75 X 12.25 inches (22.4 X 31.2 cm). The tabs surrounding the sheets allow for easy connections for any configuration of patterns and connecting sheets in series. This sheet is pink when off and glows with a white, pinkish color when on. Florescent lighting will enhance the pink hue when on. It is designed to be cut into any size or shape as long as two side tabs are left intact for power connections. The two tabs do not have to be adjacent, but must be of different colors.
A full sized sheet requires an iA4 inverter. For a finished shape that is smaller than a full sheet (A4 size), use an iA5 inverter. Most patterns smaller than one half sheet can be illuminated with an iSS4.5 inverter, but to ensure full brightness an iA5 inverter is recommended. Patterns with an overall area of about 20 square inches or smaller should be powered by an iSS4.5 inverter.
Best used with an inverter or cable with gator clips to make easy connections with the tabs for experimenting with different configurations. Permanent connections can be made with solder, glue or copper foil tape. If the wire leads will be under stress, punch a small hole in a tab, thread the wire through and then use solder or glue to secure it.