Our new A4 sheet offers a larger illuminated field measuring 8 X 11.375 inches. Exterior (edge to edge) dimensions are 8.875 X 12.25 inches. This sheet is creamy white when off and glows with a phosphorescent blue-green color when on. It is designed to cut into any size or shape as long as two side tabs are left intact for power connections. The two tabs do not have to be adjacent, but must be of different colors.
A full sized sheet requires an iA4 inverter. For a finished shape that is smaller than a full sheet (up to 70-80% of A4 size), use an iA5 inverter. Most patterns smaller than one half sheet can be illuminated with an iTY6.0 inverter, but to ensure full brightness an iA5 inverter is recommended.�� Patterns with an overall area of about 30 square inches or smaller should be powered by an iTY6.0 inverter.
Best used with an inverter (or cable) with gator clips for easy connections to the tabs for experimenting with different configurations. Permanent connections can be made with glue, copper foil tape or solder (be sure to drip the solder onto the tab; don�t let the iron touch the sheet). If the wire connections will be under stress, punch a small hole in a tab, thread the wire through, crimp it back on itself for good contact, and then use solder or glue to secure it.